RWS R10 Rifle 4.50MM, .177 Cal, 8.2 Grains, Wadcutter, 500 Pellets

Key Features:

Match pellet for serious 10m rifle work

R10 Rifle pellets are built specifically for 10m air‑rifle events, using carefully selected lead alloys and strict quality checks to maximise accuracy on paper targets. They are widely used as a reference pellet by performance‑driven shooters for both rifle testing and match preparation.​

4.50 mm head size for fuller barrel contact

This version uses a 4.50 mm head size, giving slightly more contact with the rifling than a 4.49 mm pellet. Many match barrels group best with this fuller fit, so testing 4.49 vs 4.50 mm often reveals which head size your rifle prefers.​

8.2 grain weight tuned for rifle barrels

At around 8.2 grains (≈0.53 g), R10 Rifle pellets are optimised for typical 10m match‑rifle energy levels and barrel lengths. This weight helps deliver a stable, predictable trajectory with minimal vertical spread when your rifle is correctly set up.​

Wadcutter nose for clean, easy scoring

The flat wadcutter head cuts crisp, round holes in 10m air‑rifle targets so scoring rings and inner‑10s are easy to see. Clear cutting is critical when you are checking fine group movement or shooting qualification and finals cards.​

Consistent dimensions for tight groups

R10 Match pellets are known for excellent consistency in length, diameter and weight, supported by premium‑line production standards. This reduces pellet‑related flyers and lets what you see on the target reflect your technique and rifle tuning rather than ammo variation.​

If you need season‑long stock for rifle and pistol, also consider the  RWS R10 Rifle & Pistol – Pack of 10 tins

.​

Specifications

• Calibre: .177 (4.5 mm)​
• Head size: 4.50 mm​
• Weight: 8.2 grains (≈0.53 g)​
• Pellet type: Wadcutter (flat head), match grade​
• Quantity: 500 pellets per tin​
• Recommended use: 10m air‑rifle competitions, qualification matches and high‑intensity training blocks​
• Compatibility: Suitable for .177 match/target rifles and quality PCP, CO₂ or break‑barrel rifles; always test a small batch to confirm that this 4.50 mm head size groups best in your barrel.​